R5F10DPE

产品详情

 Minimum instruction execution time can be changed from high speed (0.03125 us: @ 32 MHz operation with high-speed on-chip oscillator clock) to ultra low-speed (30.5 us: @ 32.768 kHz operation with subsystem clock)
 General-purpose register: 8 bits × 32 registers (8 bits × 8 registers × 4 banks)
 ROM: 24 to 256 KB, RAM: 2 to 16 KB, Data flash memory: 8 KB
 On-chip high-speed on-chip oscillator clocks
 Select from 32 MHz (TYP.), 24 MHz (TYP.), 16 MHz (TYP.), 8 MHz (TYP.), and 4 MHz (TYP.)
 On-chip single-power-supply flash memory (with prohibition of block erase/writing function)
 Self-programming (with boot swap function/flash shield window function)
 On-chip debug function
 On-chip power-on-reset (POR) circuit and voltage detector (LVD)
 On-chip watchdog timer (operable with the dedicated low-speed on-chip oscillator clock)
 On-chip multiplier and divider/multiply-accumulator
 16 bits × 16 bits = 32 bits (Unsigned or signed)
 32 bits ÷ 32 bits = 32 bits (Unsigned)
 16 bits × 16 bits + 32 bits = 32 bits (Unsigned or signed)
 On-chip clock output/buzzer output controller
 On-chip BCD adjustment
I/O ports: 38 to 84
 CMOS I/O port: 35 to 78 (LED direct drive port: 9 to 16, N-ch OD selectable port: 4 to 6)
 CMOS input port: 5
 CMOS output port: 0 to 1 Timer
 16-bit timer: 24 channels
 Watchdog timer: 1 channel
 Real-time clock: 1 channel
 Interval timer: 1 channel
 Serial interface CSI
 UART (LIN-bus supported)
 Simplified I2C communication
 aFCAN controller

Stepper motor controller/driver with zero point detection (ZPD): 1, 2, 4-channels
LCD controller/driver (segcom): 27×4, 39×4, 48×4, 53×4
Sound generator
 8/10-bit resolution A/D converter (VDD = EVDD =2.7 to 5.5 V): 5 to 9 channels
 Standby function: HALT, STOP, SNOOZE mode

Power supply voltage: VDD = 2.7 to 5.5 V
Operating ambient temperature: J grade products TA = -40℃ to +85℃
                               L grade products TA = -40℃ to +105℃